Navigation

    LILYGO

    • Register
    • Login
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups

    Problem initialicing Power Managment Unit

    Common problems
    2
    5
    238
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • E
      emperorbeststand last edited by

      Hi, im using a LilyGo camera S3, trying the examples given in the github repository im having problems with the Xpower library. At the moment of uploading the sketch MinimalPowersExample the answer is "failed to initialize power....". I tried to change parameters and the Xpower version but is useless.
      9b2f7f9a-cc5b-453d-8ba9-eed6a596926b-image.png

      1 Reply Last reply Reply Quote 0
      • teastain2
        teastain2 last edited by

        Have you been able to upload ANY examples or other sketches?

        E 1 Reply Last reply Reply Quote 0
        • E
          emperorbeststand @teastain2 last edited by

          @teastain2 Yes, nothing works, and i missed that im using a T_SIMCAM board, I thougth that it was a S3 but i was wrong.

          Im getting trouble inicialiting the camera, and i get this error:
          e8a6317f-4c5b-4e4d-8a5a-df18fe2feaf8-image.png
          I think is because in the inicialization parameters of the camera im not putting the correct values on the SDA and SDL. Looking on the SIMCAM pinmap I don't find the values for that pins.

          Thanks for the help, is my first time with these type of boards :))))

          teastain2 1 Reply Last reply Reply Quote 0
          • teastain2
            teastain2 @emperorbeststand last edited by

            @emperorbeststand
            Can you leave a link to the sketch that you are trying to run?
            The i2c SDA, SCL are usually set in the sketch or the library header...if you are downloading a sketch by LilyGO for your exact board.
            Are you using Arduino IDE 2.x.x?
            The official LilyGO GitHub repository is here:
            https://github.com/Xinyuan-LilyGO/LilyGo-Camera-Series
            Including the T-SIMCAM with schematics.
            -Terry

            BTW the T-SIMCAM uses an S3, I believe!

            E 1 Reply Last reply Reply Quote 0
            • E
              emperorbeststand @teastain2 last edited by

              @teastain2 Thank you. It was the pins that were wrong, I looked at the schemes on the lilygo github and put the rigth ones.

              Is realy confusing that if you download a program for a board it gives you the pins wrong :////

              1 Reply Last reply Reply Quote 0
              • First post
                Last post
              Powered by NodeBB | Contributors