Topics created by Winfried

Edit: It appears TFT_eSPI won't work on that board, since "the interface has no DC pin so it is not compatible with the interface type supported by the library." (source)

T-DISPLAY uses ESP32
T-DISPLAY-S2 uses ESP32-S2
As shown in the figure below, in addition to the already used IO ports, you can freely allocate available IO ports

75fd1dbd-a8a7-49a9-beeb-1094e1e35862-image.png

@winfried Hi. You can use the 3.7V battery in your picture to power the T-display, note the +, — signs.

Hello , here is the driver link for reference :

https://github.com/Xinyuan-LilyGO/CH9102_Mac_Driver
https://github.com/Xinyuan-LilyGO/CH9102_Driver