@mendo2 Have you tried to force upload mode?

I mean press and hold left button, press Reset button on the side while keep hold left button. Wait 2 - 3 sec until computer recognize your device.
Then select Port in IDE and upload scetch.
(left button as looking from USB port perspective)

Hi there,
Maybe someone could help me find out what is going on.
I have very simple sketch having only 2 external libraries (see my platforio.ini file)

[env:esp32-s3-devkitc-1]
platform = espressif32
board = esp32-s3-devkitc-1
framework = arduino
platform_packages = 
	framework-arduinoespressif32@https://github.com/espressif/arduino-esp32.git#2.0.5
build_flags = 
	-D LV_LVGL_H_INCLUDE_SIMPLE
	-D BOARD_HAS_PSRAM
	-D ARDUINO_USB_MODE=1
	-D ARDUINO_USB_CDC_ON_BOOT=1
;board_build.partitions = default_8MB.csv
board_build.arduino.memory_type = qio_opi
;board_build.flash_size = 8MB
monitor_speed = 115200
lib_deps = 
	mathertel/OneButton@^2.0.3
   	esphome/ESP32-audioI2S@^2.0.6

When I execute this there is constant

Button 1 longPress

event. Of course you can see also

Button 1 longPress start 

at the begin but later there is only Button 1 longPress. Like it would be on GPIO constant LOW signal.

But if I have sketch without Audio library everything works just fine.
Is there something I should change / check to have it work?
Any comment will be appreciated.

BTW in Arduino IDE all works as expected.