Navigation

    LILYGO
    • Register
    • Login
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    1. Home
    2. fdaher
    F
    • Profile
    • Following 0
    • Followers 0
    • Topics 1
    • Posts 6
    • Best 1
    • Groups 0

    fdaher

    @fdaher

    1
    Reputation
    1
    Profile views
    6
    Posts
    0
    Followers
    0
    Following
    Joined Last Online
    fdaher Unfollow Follow

    Best posts made by fdaher

    • RE: ESP32 eInk T5 2.13 on MicroPython

      Hello everyone,
      I could run using Waveshare lib!!
      Thank you so much!!

      posted in Product information
      F
      fdaher

    Latest posts made by fdaher

    • RE: ESP32 eInk T5 2.13 on MicroPython

      Hello everyone,
      I could run using Waveshare lib!!
      Thank you so much!!

      posted in Product information
      F
      fdaher
    • RE: ESP32 eInk T5 2.13 on MicroPython

      Demo Lib from github:

      epaper2in13.py

      from micropython import const
from machine import SPI, Pin
from time import sleep_ms
import ustruct

# Display resolution
EPD_WIDTH  = const(250)
EPD_HEIGHT = const(122)
# datasheet says 250x122 (increased to 128 to be multiples of 8)

# Display commands
DRIVER_OUTPUT_CONTROL                = const(0x01)
# Gate Driving Voltage Control       0x03
# Source Driving voltage Control     0x04
BOOSTER_SOFT_START_CONTROL           = const(0x0C) # not in datasheet
#GATE_SCAN_START_POSITION             = const(0x0F) # not in datasheet
DEEP_SLEEP_MODE                      = const(0x10)
DATA_ENTRY_MODE_SETTING              = const(0x11)
#SW_RESET                             = const(0x12)
#TEMPERATURE_SENSOR_CONTROL           = const(0x1A)
MASTER_ACTIVATION                    = const(0x20)
#DISPLAY_UPDATE_CONTROL_1             = const(0x21)
DISPLAY_UPDATE_CONTROL_2             = const(0x22)
# Panel Break Detection              0x23
WRITE_RAM                            = const(0x24)
WRITE_VCOM_REGISTER                  = const(0x2C)
# Status Bit Read                    0x2F
WRITE_LUT_REGISTER                   = const(0x32)
SET_DUMMY_LINE_PERIOD                = const(0x3A)
SET_GATE_TIME                        = const(0x3B)
#BORDER_WAVEFORM_CONTROL              = const(0x3C)
SET_RAM_X_ADDRESS_START_END_POSITION = const(0x44)
SET_RAM_Y_ADDRESS_START_END_POSITION = const(0x45)
SET_RAM_X_ADDRESS_COUNTER            = const(0x4E)
SET_RAM_Y_ADDRESS_COUNTER            = const(0x4F)
TERMINATE_FRAME_READ_WRITE           = const(0xFF) # not in datasheet, aka NOOP


class EPD:
    def __init__(self):
        self.spi = SPI(2, baudrate=20000000, polarity=0, phase=0, sck=Pin(18), mosi=Pin(23), miso=Pin(17))
        self.spi.init()

        dc = Pin(17)
        cs = Pin(5)
        rst = Pin(16)

        self.cs = cs
        self.dc = dc
        self.rst = rst
        #self.busy = busy
        self.cs.init(self.cs.OUT, value=1)
        self.dc.init(self.dc.OUT, value=0)
        self.rst.init(self.rst.OUT, value=0)
        self.width = EPD_WIDTH
        self.height = EPD_HEIGHT

        self.size = self.width * self.height // 8
        self.buf = bytearray(self.size)

    LUT_FULL_UPDATE    = bytearray(b'\x80\x60\x40\x00\x00\x00\x00\x10\x60\x20\x00\x00\x00\x00\x80\x60\x40\x00\x00\x00\x00\x10\x60\x20\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x03\x03\x00\x00\x02\x09\x09\x00\x00\x02\x03\x03\x00\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x15\x41\xA8\x32\x30\x0A')
    LUT_PARTIAL_UPDATE = bytearray(b'\x00\x00\x00\x00\x00\x00\x00\x80\x00\x00\x00\x00\x00\x00\x40\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x0A\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x15\x41\xA8\x32\x30\x0A')

    def clearBuffer(self):
        self._command(b'\x24')
        for i in range(0, len(self.buf)):
            self.buf[i] = 255
            self._data(bytearray([self.buf[i]]))

    def displayBuffer(self, buf):
        self._command(b'\x24')
        for i in range(0, len(buf)):
            self._data(bytearray([buf[i]]))
        self._command(b'\x22')
        self._command(b'\xC7')
        self._command(b'\x20')
        self._command(bytearray([TERMINATE_FRAME_READ_WRITE]))
        self.wait_until_idle()

    def _command(self, command, data=None):
        self.cs(1) # according to LOLIN_EPD
        self.dc(0)
        self.cs(0)
        self.spi.write(command)
        self.cs(1)
        if data is not None:
            self._data(data)

    def _data(self, data):
        self.cs(1) # according to LOLIN_EPD
        self.dc(1)
        self.cs(0)
        self.spi.write(data)
        self.cs(1)

    def init(self):
        self.reset()

        self.wait_until_idle();
        self._command(b'\x12'); # soft reset
        self.wait_until_idle();


        self._command(b'\x74', b'\x54'); #set analog block control
        self._command(b'\x7E', b'\x3B'); #set digital block control
        self._command(b'\x01', b'\xF9\x00\x00'); #Driver output control
        self._command(b'\x11', b'\x01'); #data entry mode
        #set Ram-X address start/end position
        self._command(b'\x44', b'\x00\x0F'); #0x0C-->(15+1)*8=128
        #set Ram-Y address start/end position
        self._command(b'\x45', b'\xF9\x00\x00\x00'); # 0xF9-->(249+1)=250

        self._command(b'\x3C', b'\x03'); # BorderWavefrom
        self._command(b'\x2C', b'\x55'); # VCOM Voltage

        self._command(b'\x03', bytes([self.LUT_FULL_UPDATE[70]])); # ??

        self._command(b'\x04')
        self._data(bytes([self.LUT_FULL_UPDATE[71]])); # ??
        self._data(bytes([self.LUT_FULL_UPDATE[72]])); # ??
        self._data(bytes([self.LUT_FULL_UPDATE[73]])); # ??


        self._command(b'\x3A', bytes([self.LUT_FULL_UPDATE[74]])); # Dummy Line
        self._command(b'\x3B', bytes([self.LUT_FULL_UPDATE[75]])); # Gate time

        self.set_lut(self.LUT_FULL_UPDATE)

        self._command(b'\x4E', b'\x00'); # set RAM x address count to 0;
        self._command(b'\x4F', b'\xF9\x00'); # set RAM y address count to 0X127;
        self.wait_until_idle()

    def wait_until_idle(self):
        sleep_ms(1000)

    def reset(self):
        self.rst(1)
        sleep_ms(1)

        self.rst(0)
        sleep_ms(10)

        self.rst(1)

    def set_lut(self, lut):
        self._command(bytearray([WRITE_LUT_REGISTER]), lut)

    # put an image in the frame memory
    def set_frame_memory(self, image, x, y, w, h):
        # x point must be the multiple of 8 or the last 3 bits will be ignored
        x = x & 0xF8
        w = w & 0xF8

        if (x + w >= self.width):
            x_end = self.width - 1
        else:
            x_end = x + w - 1

        if (y + h >= self.height):
            y_end = self.height - 1
        else:
            y_end = y + h - 1

        self.set_memory_area(x, y, x_end, y_end)
        self.set_memory_pointer(x, y)
        self._command(bytearray([WRITE_RAM]), image)

    # replace the frame memory with the specified color
    def clear_frame_memory(self, color):
        self.set_memory_area(0, 0, self.width - 1, self.height - 1)
        self.set_memory_pointer(0, 0)
        self._command(bytearray([WRITE_RAM]))
        # send the color data
        for i in range(0, (self.width * self.height)//8):
            self._data(bytearray([color]))

    # draw the current frame memory and switch to the next memory area
    def display_frame(self):
        self._command(bytearray([DISPLAY_UPDATE_CONTROL_2]), b'\xC7')
        self._command(bytearray([MASTER_ACTIVATION]))
        self._command(bytearray([TERMINATE_FRAME_READ_WRITE]))
        self.wait_until_idle()

    # specify the memory area for data R/W
    def set_memory_area(self, x_start, y_start, x_end, y_end):
        self._command(bytearray([SET_RAM_X_ADDRESS_START_END_POSITION]))
        # x point must be the multiple of 8 or the last 3 bits will be ignored
        self._data(bytearray([(x_start >> 3) & 0xFF]))
        self._data(bytearray([(x_end >> 3) & 0xFF]))
        self._command(bytearray([SET_RAM_Y_ADDRESS_START_END_POSITION]), ustruct.pack("<HH", y_start, y_end))

    # specify the start point for data R/W
    def set_memory_pointer(self, x, y):
        self._command(bytearray([SET_RAM_X_ADDRESS_COUNTER]))
        # x point must be the multiple of 8 or the last 3 bits will be ignored
        self._data(bytearray([(x >> 3) & 0xFF]))
        self._command(bytearray([SET_RAM_Y_ADDRESS_COUNTER]), ustruct.pack("<H", y))
        self.wait_until_idle()

    # to wake call reset() or init()
    def sleep(self):
        self._command(bytearray([DEEP_SLEEP_MODE]))
        self.wait_until_idle()

      main.py (just for run):

      import epaper2in13
e = epaper2in13.EPD()
e.init()
e.clearBuffer()

import framebuf
buf = bytearray(128 * 250 // 8)
fb = framebuf.FrameBuffer(buf, 128, 250, framebuf.MONO_HLSB)
black = 0
white = 1
fb.fill(white)
#fb.text('Hello World',30,30,black)
for i in range(1,50):
    fb.pixel(i,i,0)

e.displayBuffer(buf)
      posted in Product information
      F
      fdaher
    • RE: ESP32 eInk T5 2.13 on MicroPython

      After search on Lilygo Github repo, I tried run the "Hello word" and I got this output on Serial Monitor.

      I'm using the controller:
      #include <GxDEPG0213BN/GxDEPG0213BN.h>

      [ 4947][E][esp32-hal-cpu.c:107] addApbChangeCallback(): duplicate func=400DABC8 arg=3FFBDD08
      [ 5248][W][sd_diskio.cpp:104] sdWait(): Wait Failed
      [ 5248][E][sd_diskio.cpp:126] sdSelectCard(): Select Failed
      [ 5248][W][sd_diskio.cpp:510] ff_sd_initialize(): GO_IDLE_STATE failed
      [ 5253][E][sd_diskio.cpp:795] sdcard_mount(): f_mount failed: (3) The physical drive cannot work
      [ 5562][W][sd_diskio.cpp:104] sdWait(): Wait Failed
      [ 5562][E][sd_diskio.cpp:126] sdSelectCard(): Select Failed
      Guru Meditation Error: Core 1 panic'ed (LoadProhibited). Exception was unhandled.

      Core 1 register dump:
      PC : 0x400d3330 PS : 0x00060030 A0 : 0x800d33ad A1 : 0x3ffb26a0
      A2 : 0x3ffc2fb8 A3 : 0x0000001a A4 : 0x00000040 A5 : 0x00000000
      A6 : 0x00000001 A7 : 0x80000001 A8 : 0x00000017 A9 : 0xffffffff
      A10 : 0x0000ffff A11 : 0x3ffb27ec A12 : 0x00000000 A13 : 0x00000000
      A14 : 0xf913be73 A15 : 0x3f500000 SAR : 0x0000001a EXCCAUSE: 0x0000001c
      EXCVADDR: 0x00000018 LBEG : 0x4008a7a9 LEND : 0x4008a7b9 LCOUNT : 0xfffffffe

      Backtrace:0x400d332d:0x3ffb26a00x400d33aa:0x3ffb26c0 0x400d3039:0x3ffb26e0 0x400d30f8:0x3ffb2700 0x400d317f:0x3ffb2720 0x401481d1:0x3ffb2740 0x401481f6:0x3ffb2760 0x400db625:0x3ffb2780 0x400d2b49:0x3ffb27a0 0x400dbea2:0x3ffb2820

      ELF file SHA256: 0000000000000000

      My code:

      /*
    LilyGo Ink Screen Series Test
        - Created by Lewis he
*/

// According to the board, cancel the corresponding macro definition
#define LILYGO_T5_V213
// #define LILYGO_T5_V22
// #define LILYGO_T5_V24
// #define LILYGO_T5_V28
// #define LILYGO_T5_V102                           
// #define LILYGO_T5_V266
// #define LILYGO_EPD_DISPLAY         //T-Display 1.02 inch epaper   //Depend  https://github.com/adafruit/Adafruit_NeoPixel
// #define LILYGO_EPD_DISPLAY_154

#include <boards.h>
#include <GxEPD.h>
#include <SD.h>
#include <FS.h>

//GDEQ0213B74
// #include <GxGDGDEW0102T4/GxGDGDEW0102T4.h> //1.02" b/w
// #include <GxGDEW0154Z04/GxGDEW0154Z04.h>  // 1.54" b/w/r 200x200
// #include <GxGDEW0154Z17/GxGDEW0154Z17.h>  // 1.54" b/w/r 152x152
// #include <GxGDEH0154D67/GxGDEH0154D67.h>  // 1.54" b/w
// #include <GxDEPG0150BN/GxDEPG0150BN.h>    // 1.51" b/w   form DKE GROUP
// #include <GxDEPG0266BN/GxDEPG0266BN.h>    // 2.66" b/w   form DKE GROUP
// #include <GxDEPG0290R/GxDEPG0290R.h>      // 2.9" b/w/r  form DKE GROUP
// #include <GxDEPG0290B/GxDEPG0290B.h>      // 2.9" b/w    form DKE GROUP
// #include <GxGDEW029Z10/GxGDEW029Z10.h>    // 2.9" b/w/r  form GoodDisplay
// #include <GxGDEW0213Z16/GxGDEW0213Z16.h>  // 2.13" b/w/r form GoodDisplay
// #include <GxGDE0213B1/GxGDE0213B1.h>      // 2.13" b/w  old panel , form GoodDisplay
// #include <GxGDEH0213B72/GxGDEH0213B72.h>  // 2.13" b/w  old panel , form GoodDisplay
// #include <GxGDEH0213B73/GxGDEH0213B73.h>  // 2.13" b/w  old panel , form GoodDisplay
// #include <GxGDEM0213B74/GxGDEM0213B74.h>  // 2.13" b/w  form GoodDisplay 4-color
// #include <GxGDEW0213M21/GxGDEW0213M21.h>  // 2.13"  b/w Ultra wide temperature , form GoodDisplay
#include <GxDEPG0213BN/GxDEPG0213BN.h>    // 2.13" b/w  form DKE GROUP
// #include <GxGDEW027W3/GxGDEW027W3.h>      // 2.7" b/w   form GoodDisplay
// #include <GxGDEW027C44/GxGDEW027C44.h>    // 2.7" b/w/r form GoodDisplay
// #include <GxGDEH029A1/GxGDEH029A1.h>      // 2.9" b/w   form GoodDisplay
// #include <GxDEPG0750BN/GxDEPG0750BN.h>    // 7.5" b/w   form DKE GROUP

#include GxEPD_BitmapExamples

// FreeFonts from Adafruit_GFX
#include <Fonts/FreeMonoBold9pt7b.h>
#include <Fonts/FreeMonoBold12pt7b.h>
#include <Fonts/FreeMonoBold18pt7b.h>
#include <Fonts/FreeMonoBold24pt7b.h>
#include <GxIO/GxIO_SPI/GxIO_SPI.h>
#include <GxIO/GxIO.h>
#include <WiFi.h>

GxIO_Class io(SPI,  EPD_CS, EPD_DC,  EPD_RSET);
GxEPD_Class display(io, EPD_RSET, EPD_BUSY);


#if defined(_HAS_SDCARD_) && !defined(_USE_SHARED_SPI_BUS_)
SPIClass SDSPI(VSPI);
#endif

#if defined(_GxGDEW0213Z16_H_) || defined(_GxGDEW029Z10_H_) || defined(_GxGDEW027C44_H_) ||defined(_GxGDEW0154Z17_H_) || defined(_GxGDEW0154Z04_H_) || defined(_GxDEPG0290R_H_)
#define _HAS_COLOR_
#endif

#if defined(LILYGO_EPD_DISPLAY)
Adafruit_NeoPixel strip(RGB_STRIP_COUNT, RGB_STRIP_PIN, NEO_GRBW + NEO_KHZ800);
#endif /*LILYGO_EPD_DISPLAY_102*/


void showFont(const char name[], const GFXfont *f);
void drawCornerTest(void);

bool setupSDCard(void)
{
#if defined(_HAS_SDCARD_) && !defined(_USE_SHARED_SPI_BUS_)
    SDSPI.begin(SDCARD_SCLK, SDCARD_MISO, SDCARD_MOSI);
    return SD.begin(SDCARD_CS, SDSPI);
#elif defined(_HAS_SDCARD_)
    return SD.begin(SDCARD_CS);
#endif
    return false;
}


void testSpeaker()
{
#if defined(_HAS_SPEAKER_)
#ifdef _HAS_PWR_CTRL_
    pinMode(SPK_POWER_EN, OUTPUT);
    digitalWrite(SPK_POWER_EN, HIGH);
#endif
    ledcSetup(LEDC_CHANNEL_0, 1000, 8);
    ledcAttachPin(SPERKER_PIN, LEDC_CHANNEL_0);
    int i = 3;
    while (i--) {
        ledcWriteTone(LEDC_CHANNEL_0, 1000);
        delay(200);
        ledcWriteTone(LEDC_CHANNEL_0, 0);
    }
#ifdef _HAS_PWR_CTRL_
    pinMode(SPK_POWER_EN, INPUT);
#endif
    ledcDetachPin(SPERKER_PIN);
#endif
}

void testWiFi()
{
    WiFi.mode(WIFI_STA);
    WiFi.disconnect();
    // WiFi.scanNetworks will return the number of networks found
    int n = WiFi.scanNetworks();

    Serial.println("scan done");
    if (n == 0) {
        Serial.println("no networks found");
    } else {
        Serial.print(n);
        Serial.println(" networks found");
        for (int i = 0; i < n; ++i) {
            // Print SSID and RSSI for each network found
            Serial.print(i + 1);
            Serial.print(": ");
            Serial.print(WiFi.SSID(i));
            Serial.print(" (");
            Serial.print(WiFi.RSSI(i));
            Serial.print(")");
            Serial.println((WiFi.encryptionType(i) == WIFI_AUTH_OPEN) ? " " : "*");
            delay(10);
        }
    }
    Serial.println("");
}

void setup()
{
    bool rlst = false;
    Serial.begin(115200);
    Serial.println();
    Serial.println("setup");

#if defined(LILYGO_EPD_DISPLAY)
    pinMode(EPD_POWER_ENABLE, OUTPUT);
    digitalWrite(EPD_POWER_ENABLE, HIGH);
    delay(50);
    // strip test
    strip.begin();
    strip.show();
    strip.setBrightness(200);
    int i = 0;
    while (i < 5) {
        uint32_t color[] = {0xFF0000, 0x00FF00, 0x0000FF, 0x000000};
        strip.setPixelColor(0, color[i]);
        strip.show();
        delay(1000);
        i++;
    }
    strip.setPixelColor(0, 0);
    strip.show();
#endif /*LILYGO_EPD_DISPLAY*/
    
#if defined(LILYGO_EPD_DISPLAY_102)
    pinMode(EPD_POWER_ENABLE, OUTPUT);
    digitalWrite(EPD_POWER_ENABLE, HIGH);
#endif /*LILYGO_EPD_DISPLAY_102*/
#if defined(LILYGO_T5_V102)
    pinMode(POWER_ENABLE, OUTPUT);
    digitalWrite(POWER_ENABLE, HIGH);
#endif /*LILYGO_T5_V102*/
  

    SPI.begin(EPD_SCLK, EPD_MISO, EPD_MOSI);

    display.init();
    display.setTextColor(GxEPD_BLACK);

    testSpeaker();

    testWiFi();

    rlst = setupSDCard();

    display.setRotation(0);
    display.fillScreen(GxEPD_WHITE);

#if defined(_HAS_COLOR_)
    display.drawExampleBitmap(BitmapExample1, 0, 0, GxEPD_WIDTH, GxEPD_HEIGHT, GxEPD_RED);
#else
    display.drawExampleBitmap(BitmapExample1, 0, 0, GxEPD_WIDTH, GxEPD_HEIGHT, GxEPD_BLACK);
#endif

#if defined(_HAS_SDCARD_)
    display.setRotation(1);
#if defined(LILYGO_T5_V102)
    display.setCursor(5, display.height() - 15);
#else
    display.setCursor(20, display.height() - 15);
#endif
    String sizeString = "SD:" + String(SD.cardSize() / 1024.0 / 1024.0 / 1024.0) + "G";
    display.println(rlst ? sizeString : "SD:N/A");

    int16_t x1, x2;
    uint16_t w, h;
    String str = GxEPD_BitmapExamplesQ;
    str = str.substring(2, str.lastIndexOf("/"));
    display.getTextBounds(str, 0, 0, &x1, &x2, &w, &h);
    display.setCursor(display.width() - w - 5, display.height() - 15);
    display.println(str);
#endif

    display.update();

    delay(1000);

}

void loop()
{
    drawCornerTest();

    int i = 0;
    while (i < 4) {
        display.setRotation(i);
        showFont("FreeMonoBold9pt7b", &FreeMonoBold9pt7b);
        //showFont("FreeMonoBold18pt7b", &FreeMonoBold18pt7b);
        //showFont("FreeMonoBold24pt7b", &FreeMonoBold24pt7b);
        i++;
    }

    display.fillScreen(GxEPD_WHITE);

    display.update();

    display.powerDown();

    esp_sleep_enable_ext1_wakeup(((uint64_t)(((uint64_t)1) << BUTTON_1)), ESP_EXT1_WAKEUP_ALL_LOW);

    esp_deep_sleep_start();

}

void showFont(const char name[], const GFXfont *f)
{
    display.fillScreen(GxEPD_WHITE);
    display.setTextColor(GxEPD_BLACK);
    display.setFont(f);
    display.setCursor(0, 0);
    display.println();
    display.println(name);
    display.println(" !\"#$%&'()*+,-./");
    display.println("0123456789:;<=>?");
    display.println("@ABCDEFGHIJKLMNO");
    display.println("PQRSTUVWXYZ[\]^_");
    display.println("`abcdefghijklmno");
    display.println("pqrstuvwxyz{|}~ ");
    display.update();
    delay(5000);
}

void drawCornerTest()
{
    display.drawCornerTest();
    delay(5000);
    uint8_t rotation = display.getRotation();
    for (uint16_t r = 0; r < 4; r++) {
        display.setRotation(r);
        display.fillScreen(GxEPD_WHITE);
        display.fillRect(0, 0, 8, 8, GxEPD_BLACK);
        display.fillRect(display.width() - 18, 0, 16, 16, GxEPD_BLACK);
        display.fillRect(display.width() - 25, display.height() - 25, 24, 24, GxEPD_BLACK);
        display.fillRect(0, display.height() - 33, 32, 32, GxEPD_BLACK);
        display.update();
        delay(5000);
    }
    display.setRotation(rotation); // restore
}
      posted in Product information
      F
      fdaher
    • RE: ESP32 eInk T5 2.13 on MicroPython

      @fdaher Remember this example was made on C++

      posted in Product information
      F
      fdaher
    • RE: ESP32 eInk T5 2.13 on MicroPython

      Unfortunatelly, I could not work with the example:
      https://github.com/Xinyuan-LilyGO/T5-Ink-Screen-Series

      Libraries conflicts, and another issues happening during the tests 😞

      posted in Product information
      F
      fdaher
    • ESP32 eInk T5 2.13 on MicroPython

      Hello,
      I bought this one last week, but the seller didnt send me examples or documentation about.
      I would like to use with MicroPython to display geolocation data.
      Could anyone please share with me libraries or details which am I able to develop things with?

      I tried use some code from internet like:

      https://www.good-display.com/product/375.html

      https://github.com/mcauser/micropython-waveshare-epaper/issues/5

      Here is following photos about the board.

      Merry Christmas!

      WhatsApp Image 2021-12-24 at 15.53.08.jpeg WhatsApp Image 2021-12-24 at 15.53.08 (1).jpeg WhatsApp Image 2021-12-24 at 15.53.08 (2).jpeg

      posted in Product information
      F
      fdaher