Topics created by ckuehnel

@lewis Here are my results of current consumption w/o red LED. The blog post is in German but Google helps. 😉

https://ckarduino.wordpress.com/2022/05/16/lilygo-t-oi-plus-risc-v-esp32-c3/

The device works much longer now. It is a good idea to make the LED switchable in a redesign.

@ckuehnel https://github.com/Xinyuan-LilyGO/LilyGo-HiGrow/tree/master/src
You can use this program directly. It will generate a web page and then display the data of DS18B20.

@andyclap When the battery is depleted, the noise source is from the DCDC boost inductor on the board, thanks for your feedback, I will discuss the solution with my team.
Recommendations on power consumption:

When starting T-Higrow, it is recommended to reduce the main frequency of ESP32 to 160, or lower, if not using WiFi, it is recommended to lower to 80, 40MHz If WiFi transmission is used, it is recommended to reduce the number of transmissions, and then package and send the data uniformly. The number of acquisitions can remain unchanged.

Thanks for your feedback.

@ckuehnel ![alt text]![0_1630891882486_IMG_4333.JPG]
Hello, this is the battery wiring method for the extended backplate.The battery type is 3.7V lithium.
(Uploading 100%)

Hello, the code has been fixed. The ESP32 Pico option is available.