@behn4m Does this folder have what you need?
https://github.com/Xinyuan-LilyGO/T-Display-S3-AMOLED/tree/main/3D_File

@teastain2 Thanks Terry.

The touchscreen is wider than the board, and in order to mount the display on a panel it has to be inserted from the front.
But the board is longer on both ends than the display, so it won't go in from the front either.
If they can be separated, I could put the display on the front of a panel and attach to the board behind through the cut-out. But if they're too fragile it could be a risk.

Can the LCD/Touchscreen assembly be separated from the main board?

Does anyone have a link to a complete datasheet, or other information on the CST816 controller including its control & data registers?
I've seen several datasheets. Some don't mention the registers at all, others have a page titled "4. REGISTERS" but the page is blank.
The touch library in the Lilygo github repository works for the basics, but the inbuilt gestures don't work. But another library I've tried does read the gestures from the controller.

The REG/CSTMutualConstants.h file in the Lilygo library has a list, but some of the comments are a bit vague and some don't line up with other libraries.

If I had the full datasheet I could explore it's full possibilities, but the information seems a bit elusive

The other issue is I ordered the non-soldered version, which comes with the connector strips loose in the box.
Generally I prefer to solder in my own when needed, on the pins needed. But as the display overlaps the other side of the board it's going to require some really tricky, careful work to get them in there without damaging anything

The functionality of the board and display is fantastic. I think it's great, just a couple of physical issues for some applications. Ordering with pre-soldered pins is probably a better option for this one.

@teastain2 Thanks Terry.

The touchscreen is wider than the board, and in order to mount the display on a panel it has to be inserted from the front.
But the board is longer on both ends than the display, so it won't go in from the front either.
If they can be separated, I could put the display on the front of a panel and attach to the board behind through the cut-out. But if they're too fragile it could be a risk.

Thanks @teastain2. I'm wondering if there's enough length in the cable to mount the display slightly further (maybe 10mm) above the board. The pics look like the lcd cable is long enough, but wasn't sure about the touchscreen connector.

@behn4m Does this folder have what you need?
https://github.com/Xinyuan-LilyGO/T-Display-S3-AMOLED/tree/main/3D_File

Can the LCD/Touchscreen assembly be separated from the main board?