Posts made by Ark

@teastain2 Oh, that's great! Thanks for support!

@teastain2 said in T-Display-S3-AMOLED:

Try that and get back to me with results and we’ll go from there.
I have a generic test program for all devices that outputs activity on the Serial Monitor, as a baseline to test your board and Arduino IDE setup.
Let me know, Terry.

Hello! To suffer for a long time - and everything will work out. I downloaded the EXAMPLES folder from the official GitHub page...And only one of the three sketches was uploaded ... Yes, the display is worked, but now it’s not entirely clear why something doesn’t start from the very beginning ((After all, it was an official source.

@teastain2
Thanks for the feedback. Perhaps I went the wrong way from the start. If possible, a little more info. https://github.com/Xinyuan-LilyGO/T-Display-S3-AMOLED - official source with files and description. What files and how should I use?

@teastain2 Thanks, but how to return to the original state?

@ark said in T-Display-S3-AMOLED:

@ark said in T-Display-S3-AMOLED:

Hi there!
I am a beginner, so do not criticize too much. Got a new board. Tried to set clock from here -
https://github.com/MakersFunDuck/T-Display-S3-flip-clock-

Constantly saw an error with "TouchLib.h"

I didn’t find the reason, and it’s not entirely clear why the touch library is needed if the device does not support.

Later, I accidentally filled in an empty file, now there are no inscriptions on the screen (But the device is visible in the program.

1. How to return to the original state? Is there a hard reset?
2. Why didn't the clock start?

Thanks for your help

Addition info - after execute I all time see next - Hard resetting via RTS pin...

Alas, I see that I am having a dialogue with myself. But from the latter, I found that the software signed up for the board - I see it in the router and it responds(ping). And the screen is black and nothing is displayed ... So far I can not understand what is the reason ....

@ark said in T-Display-S3-AMOLED:

Hi there!
I am a beginner, so do not criticize too much. Got a new board. Tried to set clock from here -
https://github.com/MakersFunDuck/T-Display-S3-flip-clock-

Constantly saw an error with "TouchLib.h"

I didn’t find the reason, and it’s not entirely clear why the touch library is needed if the device does not support.

Later, I accidentally filled in an empty file, now there are no inscriptions on the screen (But the device is visible in the program.

1. How to return to the original state? Is there a hard reset?
2. Why didn't the clock start?

Thanks for your help

Addition info - after execute I all time see next - Hard resetting via RTS pin...

Hi there!
I am a beginner, so do not criticize too much. Got a new board. Tried to set clock from here -
https://github.com/MakersFunDuck/T-Display-S3-flip-clock-

Constantly saw an error with "TouchLib.h"

I didn’t find the reason, and it’s not entirely clear why the touch library is needed if the device does not support.

Later, I accidentally filled in an empty file, now there are no inscriptions on the screen (But the device is visible in the program.

1. How to return to the original state? Is there a hard reset?
2. Why didn't the clock start?

Thanks for your help