Problem uploading a Sketch to T-Beam Supreme S
-
I have the T-Beam supreme S, and before I start coding I wanted to test everything is as expected. So I decided to upload the KitchenSink example sketch. The sketch compiles ok, but never uploads. I get this error:
Failed uploading: uploading error: exit status 2
Does the device have to be in T-Beam Boot mode or is there another way?
When I have been in T-Beam Boot mode, I see device is mounted as a drive on my Mac. When in this mode the USB connection used by IDE is not available, and I guess that's one of the reasons I get the error..
I have also read that you need to convert your compiled sketch bin file into a UF2 file. Never done this before and reading on this so far has me scratching my head. Is there a simple way to do this?
Maybe I've missed the documentation on this? Any advice is much appreciated.
Wellco
-
@wellco Replying to myself here; it may help others
I found that using PlatromIO in VS code I was able to upload my sketch, where I couldn't with IDE. Once I uploaded in VS code I was then able to upload from IDE. Seems a bit strange.
-
Did you format the softRF firmware, or can you still use it and upload your sketches?