T-Display S3 Long 2x15 Half Pitch connector?
-
I've enjoyed the T-Display S3 Long for the programming I've done with it so far, but it's been limited to software only so far because I cannot find any way to connect to the half pitch pins on the underside! All of my connectors and jumpers are for full pitch work with breadboards. I'm looking to do some prototyping with younger kids and would like to avoid soldering for now. Are there any connectors available for these pins that we would use standard jumpers, bread board wires, and Wago connectors with? I've been searching for weeks now, but I must not have the right search terms as there must be something that'll connect to these pins.
Thank you for any help.
-
That is a bit of a problem! They are 1.27mm 'half pitch', where 2.54mm is the standard 0.1" U.S. DIP package size.
The LilyGO schematic says 'PZ127-2-15-S'.
Your board also has two Qwiic I2C connectors and supplied ribbons!
All of my projects are I2C, but you can program the four I2C pins on the ribbons to be GPIO for LEDs and switches.
The LilyGO T-Display S3 with soldered headers is a much better board for experimenting and education, IMHO.
https://www.lilygo.cc/products/t-display-s3?variant=42351558590645
-Terry
