JST-GH connector on T-Camera S3 ?
-
Hey,
I was wondering: what is the purpose of the JST-GH 1.25mm connector on the left side of the board?
https://www.lilygo.cc/cdn/shop/products/LILYGO-T-CAMERA-S3_12.jpgIt is not documented on the schematic but there are +/- signs on the board so I would guess it is to connect a battery maybe?
If yes what type of battery can we use?Many thanks for your help
-
@jip Yes, battery.
-
thanks @teastain2
is there a doc describing the min/max voltage we can use? -
@jip The recommended battery is this:
Panasonic Lithium Ion 18650 3.7V, 3400Mah
You can put 5V into the two prong battery plug and the regulator will bring it down to 3.3.
The unit will still work, somewhat @ 3v.
