T-DISPLAY S3 Can't use TFT_eSPI
-
my t-display can't use TFT_eSPI I don't know why I tested with TFT file from example not work but I test with Factory file is work . Does anybody help me?
-
@bombbaza Did You copy the TFT_eSPI from the LilyGO LilyGO T-Display S3 GitHub repository Lib directly to your Arduino Libraries folder and overwrite the existing one, replace, not merge? This is needed to work properly.
I have a LilyGO T-Display S3 help GitHub repository here:
https://github.com/teastainGit/LilyGO-T-display-S3-setup-and-examples
If you read every line of the setup text you will have a better understanding of the board !!!
My simple examples use TFT_eSPI and work quite well.-Terry
-
@teastain2 Thx a lot my friend I will follow your recommend . I gonna give feedback ASAP
-
@teastain2 The point is like this before this my T-Display S3 can work normally but after I unplug and pluged it It doesn't show any thing . Do you have personal chat I gonna send more information ?
-
@bombbaza
In my repository setup text I suggest you contact me by email for off-line one to one help.
-Terry
