Location of resistor RV1 on LilyGo-T-A7608X
-
Hi,
I posted an issue on the board's github page (here), but I got no response.
Basically, similar to other boards (see this issue), the T-A7608X board resets the SIMCOM module when the ESP32 wakes after a reset. Looking at the schematic:
this can be avoided by desoldering resistor RV1, as discussed in the issue linked above.
Does anybody from Lilygo knows where this resistor is located, so that I can desolder it?
Thanks.
-
RV1 resistor position, as shown in the diagram