@teastain2

I found the problem, the USB-C cable does not work, I have 4 USB-C cables, there is only one that works correctly.
The problem is solved.

THANKS.

@teastain2

I found the problem, the USB-C cable does not work, I have 4 USB-C cables, there is only one that works correctly.
The problem is solved.

THANKS.

@teastain2
This is my device T-SIM7080G S3: https://www.lilygo.cc/products/t-sim7080-s3

Do you have other ESP32S3 boards that connect OK to this computer and this cable?
Yes, in the other micro USB port, to upload firmware for the SIM7080, windows recognized when plugged in. it's OK. but when i connect with USB-C, windows not detect, nothing happen.

@teastain2
I've already tried this procedure but it doesn't work at all. the usb port in the device manager in windows 11 does nothing.
Normally it shows the com port or it detect the esp32 as an unknown device. but nothing happens.

I just received my device lilygo-Sim-7080G, and when I plug in the USB-C to send my sketch, my Windows 11 PC does not detect the port, nothing happens on device manager.
Can you help me please ?
THANKS