<![CDATA[T SIMCAM getting error in camera initialisation]]>I had a T SIMCAM with OV5640 camera. I am a new user and giving a try with example of "LilyGo-Camera-Series-master" I am able to complie the code in VS and able to flash in card. But during initialisation I am not getting any output. The finish line are shown as below.
Code Compliing
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [== ] 17.3% (used 56664 bytes from 327680 bytes)
Flash: [= ] 11.5% (used 751169 bytes from 6553600 bytes)
Building .pio\build\t-camera-sim\firmware.bin
esptool.py v4.5.1
Creating esp32s3 image...
Merged 2 ELF sections
Successfully created esp32s3 image.
====================================================== [SUCCESS] Took 25.39 seconds ======================================================

Environment Status Duration

t-camera-sim SUCCESS 00:00:25.387
======================================================= 1 succeeded in 00:00:25.387 =======================================================

  • Terminal will be reused by tasks, press any key to close it.

Code Flashing:
Writing at 0x000ba921... (93 %)
Writing at 0x000c00e5... (96 %)
Writing at 0x000c5bb8... (100 %)
Wrote 751536 bytes (496012 compressed) at 0x00010000 in 6.8 seconds (effective 885.1 kbit/s)...
Hash of data verified.

Leaving...
Hard resetting via RTS pin...
============================================== [SUCCESS] Took 16.32 seconds ==============================================

Environment Status Duration

t-camera-sim SUCCESS 00:00:16.320
============================================== 1 succeeded in 00:00:16.320 ==============================================

In console after flashing
--- Terminal on COM5 | 115200 8-N-1
--- Available filters and text transformations: colorize, debug, default, direct, esp32_exception_decoder, hexlify, log2file, nocontrol, printable, send_on_enter, time
--- More details at https://bit.ly/pio-monitor-filters
--- Quit: Ctrl+C | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H
......................................................................................................................................................................................

]]>https://www.community.lilygo.cc/topic/983/t-simcam-getting-error-in-camera-initialisationRSS for NodeSat, 06 Jun 2026 10:37:18 GMTThu, 23 May 2024 02:43:41 GMT60