<![CDATA[Partition Not found / Please Set the Partition]]>Trying to run MinimalCameraExample.ino via Arduino IDE, but keep getting the following error. Any ideas on how I "set the partition"?

Error:

12:57:44.893 -> Started AP mode host name :LilyGo-Cam-34:85IP address is :192.168.4.1
12:57:45.154 -> E (3914) MFN: Partition Not found
12:57:45.154 -> E (3914) MFN: Please Set the Partition[ m

Board: Lilygo 7080G
Board Set: ESP32S3 Dev Module
Partition Scheme: 16M Flash(3MB APP/9.9MB FATFS)

]]>https://www.community.lilygo.cc/topic/781/partition-not-found-please-set-the-partitionRSS for NodeSat, 11 Apr 2026 01:54:27 GMTMon, 06 Nov 2023 21:05:56 GMT60<![CDATA[Reply to Partition Not found / Please Set the Partition on Mon, 13 Nov 2023 15:42:45 GMT]]>Does anyone else have any advice on what’s going on here?

]]>https://www.community.lilygo.cc/post/1403https://www.community.lilygo.cc/post/1403Mon, 13 Nov 2023 15:42:45 GMT<![CDATA[Reply to Partition Not found / Please Set the Partition on Wed, 08 Nov 2023 18:08:46 GMT]]>@lilydoh Hey you found the Easter Egg!
So I suggest that you build up from there, as a form of de-bugging.
I am not familiar with sim-cams, so you may have to take it from here!
Keep me posted, tho' !!!
-Terry

]]>https://www.community.lilygo.cc/post/1386https://www.community.lilygo.cc/post/1386Wed, 08 Nov 2023 18:08:46 GMT<![CDATA[Reply to Partition Not found / Please Set the Partition on Wed, 08 Nov 2023 16:54:41 GMT]]>@teastain2

08:54:08.992 -> tick
08:54:08.992 -> tock
08:54:08.992 -> tick
08:54:08.992 -> tock
08:54:09.521 -> tick
08:54:10.497 -> tock
]]>https://www.community.lilygo.cc/post/1385https://www.community.lilygo.cc/post/1385Wed, 08 Nov 2023 16:54:41 GMT<![CDATA[Reply to Partition Not found / Please Set the Partition on Wed, 08 Nov 2023 16:37:47 GMT]]>@lilydoh Thanks for the info.
I see that Arduino IDE thinks it is a C3. That happens on my other LilyGO boards and I think it is a bug in the IDE.

You have to make sure the ESP32S3 Dev Module is the board type.

Can you try my sketch called
'Generic_tick_tock_serial_test.ino' ?
It is available here:
https://github.com/teastainGit/LilyGO-T-display-S3-setup-and-examples

This will make sure that there is nothing in your big sketch that is giving the fault.
-Terry

]]>https://www.community.lilygo.cc/post/1383https://www.community.lilygo.cc/post/1383Wed, 08 Nov 2023 16:37:47 GMT<![CDATA[Reply to Partition Not found / Please Set the Partition on Wed, 08 Nov 2023 05:18:47 GMT]]>When I select "Board Info" in Arduino IDE, I receive this: Screenshot 2023-11-07 at 9.18.05 PM.jpg

]]>https://www.community.lilygo.cc/post/1379https://www.community.lilygo.cc/post/1379Wed, 08 Nov 2023 05:18:47 GMT<![CDATA[Reply to Partition Not found / Please Set the Partition on Wed, 08 Nov 2023 05:09:46 GMT]]>@teastain2

This is the board I purchased: LILYGO T-SIM7080G-S3 ESP32-S3 SIM7080 Development Board Supports Cat-M NB-Iot WIFI Bluetooth 5.0 With GPS Flash 16MB PSRAM 8MB

Screenshot 2023-11-07 at 9.04.16 PM.jpg Screenshot 2023-11-07 at 9.04.05 PM.jpg

]]>https://www.community.lilygo.cc/post/1378https://www.community.lilygo.cc/post/1378Wed, 08 Nov 2023 05:09:46 GMT<![CDATA[Reply to Partition Not found / Please Set the Partition on Wed, 08 Nov 2023 01:02:24 GMT]]>ooo. Can you confirm what ESP32 you have?
LilyGO makes a confusing array of 7080g boards!

]]>https://www.community.lilygo.cc/post/1377https://www.community.lilygo.cc/post/1377Wed, 08 Nov 2023 01:02:24 GMT<![CDATA[Reply to Partition Not found / Please Set the Partition on Tue, 07 Nov 2023 23:05:34 GMT]]>@teastain2 Unfortunately I'm receiving the same error:

15:03:11.099 -> Started AP mode host name :LilyGo-Cam-34:85IP address is :192.168.4.1
15:03:11.358 -> E (3912) MFN: Partition Not found
15:03:11.358 -> E (3912) MFN: Please Set the Partition

Partition Scheme: Huge App (3MB no OTA / 1mb Spiffs)

]]>https://www.community.lilygo.cc/post/1376https://www.community.lilygo.cc/post/1376Tue, 07 Nov 2023 23:05:34 GMT<![CDATA[Reply to Partition Not found / Please Set the Partition on Tue, 07 Nov 2023 17:48:10 GMT]]>@teastain2 I'll try this and will report back. Thank you.

]]>https://www.community.lilygo.cc/post/1375https://www.community.lilygo.cc/post/1375Tue, 07 Nov 2023 17:48:10 GMT<![CDATA[Reply to Partition Not found / Please Set the Partition on Tue, 07 Nov 2023 00:33:11 GMT]]>@lilydoh Partition Scheme is
'Huge APP (3MB No OTA/1MB SPIFFS)'

]]>https://www.community.lilygo.cc/post/1371https://www.community.lilygo.cc/post/1371Tue, 07 Nov 2023 00:33:11 GMT