<![CDATA[T-Journal default Sketch]]>Hello.
Can someone please show me where I can find the standard sketch as a download and how I can upload it onto the T-Journal?
I bought 3 T-Journals and would like to address them with 3 different IP addresses.

greetings
Bunta

]]>https://www.community.lilygo.cc/topic/725/t-journal-default-sketchRSS for NodeSat, 14 Mar 2026 00:13:11 GMTSat, 14 Oct 2023 19:40:12 GMT60<![CDATA[Reply to T-Journal default Sketch on Sun, 22 Oct 2023 10:31:30 GMT]]>I have the https://www.lilygo.cc/products/t-journal.

This is exactly why, PlatformIO or Arduino, which Sketch, etc., I asked for instructions.
If I sell such products, I also have to provide instructions on how to use them. And by that I don't just mean plug it in and use it. The products are specifically designated as a development board. Then I want to be able to “develop” with it. But if I have to start from scratch because there are no useful instructions, I can also assemble the hardware myself.
I bought these modules and was hoping for some convenience so that I didn't have to start from scratch and could implement my project quickly.
Really very unfortunate!

]]>https://www.community.lilygo.cc/post/1294https://www.community.lilygo.cc/post/1294Sun, 22 Oct 2023 10:31:30 GMT<![CDATA[Reply to T-Journal default Sketch on Fri, 20 Oct 2023 19:07:17 GMT]]>@bunta
This is real problem for non-IOT products from LilyGO.
They are intended for purchase and use, as-supplied, not as an Arduino IDE hobbyist, like myself. Subsequently the tech support is 'vague?' or non existent.
You may have seen this:
Screenshot 2023-10-20 at 3.00.03 PM.png
on the LilyGO sales page:
https://www.lilygo.cc/en-ca/products/t-journal
but there are a slew of different models supported, but not really the sketches.
it also appears that the camera requires programming with PlatformIO, not Arduino IDE.
Since we do not know what program is the one shipped...you could lose all functionality.
The addressing goes by MAC address, which should be supplied on the unit or the packaging.
The pre-compiled firmware is here:
https://github.com/Xinyuan-LilyGO/LilyGo-Camera-Series/tree/master/firmware
But which one is your T-Journal?
-Terry

]]>https://www.community.lilygo.cc/post/1290https://www.community.lilygo.cc/post/1290Fri, 20 Oct 2023 19:07:17 GMT<![CDATA[Reply to T-Journal default Sketch on Fri, 20 Oct 2023 17:10:12 GMT]]>Can't anyone answer that for me?
Unfortunately, support doesn't respond to my emails either 😞
Very unfortunate.

]]>https://www.community.lilygo.cc/post/1288https://www.community.lilygo.cc/post/1288Fri, 20 Oct 2023 17:10:12 GMT