TTGO T-Higrow

Reply to TTGO T-Higrow on Wed, 10 Aug 2022 01:50:42 GMT

lewis — Wed, 10 Aug 2022 01:50:42 GMT

@andyclap When the battery is depleted, the noise source is from the DCDC boost inductor on the board, thanks for your feedback, I will discuss the solution with my team.
Recommendations on power consumption:

When starting T-Higrow, it is recommended to reduce the main frequency of ESP32 to 160, or lower, if not using WiFi, it is recommended to lower to 80, 40MHz
If WiFi transmission is used, it is recommended to reduce the number of transmissions, and then package and send the data uniformly. The number of acquisitions can remain unchanged.

Thanks for your feedback.

Reply to TTGO T-Higrow on Mon, 01 Aug 2022 18:36:27 GMT

andyclap — Mon, 01 Aug 2022 18:36:27 GMT

@ckuehnel said in TTGO T-Higrow:

https://ckarduino.wordpress.com/2021/11/16/messung-von-umgebungsbedingungen-fur-pflanzen-mit-lilygottgo-t-higrow-sensor/

Hallo! Thanks for the detailed information in your review.

Did you notice any whine when running off battery?
I have a similar devkit (diy more) but there is a high-pitched whine from the esp32 module, even in deep sleep mode.
And the battery drains rather quickly (3 days or so, wake every 30m).

Is the Lilygo one silent?

Reply to TTGO T-Higrow on Mon, 06 Dec 2021 01:40:49 GMT

Lilygo — Mon, 06 Dec 2021 01:40:49 GMT

@ckuehnel that's a very good project, thank you for sharing and your recognition of our products, are you a software/hardware engineer? Look forward to have more cooperation with you , you could contact us at any time if you have any suggestions or ideas for us .